what do you think about Power Cable

Shares with multiple roots or twisted into a thin flexible wire rope, wire rope is twisted into a multi-unit, then to rope core as the center, by a certain number of shares into a spiral twist of the rope around. In the material handling machinery for improved traction, tension and load-bearing purposes. Rope, high strength, light weight, smooth, easy to suddenly break the whole root, reliable.

Steel wire rope in the industrial countries are the standard products, according to use needs to choose its diameter, strand number, number per wire, tensile strength and adequate safety factor, it’s specifications can be obtained in the manual check. Except layer wire rope wear, mainly due to roll around the wheel and when metal fatigue caused by repeated bending gradually broken, so the pulley or drum and rope diameter ratio is an important factor in the decision rope life. Ratio of the large, steel bending stress, long life, but the bulky size. Must use the occasion to determine the appropriate ratio. Surface layer of wire rope wear, corrosion or broken wires within each screw from the number exceeds the specified value should be scrapped. Rope is mainly used in lifting, pulling and other transportation needs in the transport of high-strength cord.

Rope in the industrial countries are the standard products, according to use needs to choose its diameter, strand number, number per wire, tensile strength and adequate safety factor, it’s specifications can be obtained in the manual check. Except layer wire rope wear, mainly due to roll around the wheel and when metal fatigue caused by repeated bending gradually broken, so the pulley or drum and rope diameter ratio is an important factor in the decision rope life. Ratio of the large, steel bending stress, long life, but the bulky size. Must use the occasion to determine the appropriate ratio. Surface layer of wire rope wear, corrosion or broken wires within each screw from the number exceeds the specified value should be scrapped. Rope is mainly used in lifting, pulling and other transportation needs in the transport of high-strength cord.

Power Cable diameter increases may occur locally, and can spread quite a long rope. Rope diameter increased distortion normally associated with the rope core (as in special circumstances, the fiber core due to damp and expansion), with the inevitable result is that the outer strands to create an imbalance, caused by incorrect positioning.

HESCO Barriers are a new product.

Filed under: Aluminum by Garage Door Opener on 2012-05-19 08:27:45p | Social tagging: HESCO Barriers > Power cable > Steel wire rope
No Comments »

The disadvantage of tempered glass

Tempered glass can not be after cutting, and processing, only the steel before processing of the glass to the desired shape, then steel processing.Although the strength of tempered glass stronger than ordinary glass, but glass when the temperature changes, blew (his break) the possibility of ordinary glass blew possibility does not exist.

September 23, 1971, Luoyang Glass cadres and workers in the Ministry, under the guidance of experts, in full cooperation with a sister unit, united struggle of more than three months, and finally successfully built the first float glass production line to produce our first piece of float glass. Mechanical strength, flatness, light transmission are better than other flat glass. Luoyang Glass with superhuman wisdom and hard work, float round the dream of the Chinese people.

Building Glass (architectural glass) is the main varieties of flat glass, with a smooth crystal surface, light, sound insulation, thermal insulation, wear resistance, climate change, material stability and so on. It is based on quartz sand, sandstone or quartzite, limestone, feldspar, dolomite and soda ash as the main raw material, crushing, screening, batching, high-temperature melting, forming, annealing, cooling, processing and other processes made.

Filed under: Building Material Making Machinery by Garage Door Opener on 2012-05-19 08:26:25p | Social tagging: Building Glass > Float glass > Tempered glass
No Comments »

Talk about ferro silicon

Aluminium Sheet , aluminum or aluminum alloy refers to processing of materials made ​​by pressure (cut or sawn) of a rectangular cross-section to obtain uniform thickness rectangular aluminum timber
Material. International accustomed to more than 0.2mm in thickness, 500mm the following, 200mm width over a length of less than 16m aluminum or aluminum material called aluminum plate, 0.2mm The following is the foil material, 200mm width within the row material or article material (of course with the progress of large equipment, the most wide-600mm can be achieved will be more exclusive material).

aluminium coil & strip is the pressure of rolling ingots obtained by the ribbon, according to the zoning of different grades, specifications, status. Grades have 1060,1100,3003,3004,5052,8011. State of the state with O and H states, O is the soft state, H-hard state. O and H can be expressed in figures behind the level of hardness, and degree of annealing. Uses a lot of aluminum, such as: aluminum-plastic composite pipe, cable, fiber optic cable, transformer, heater, blinds, and so on.

Ferro Silicon is composed of iron and silicon alloy. Ferrosilicon is coke, steel scrap, quartz (or silica) as raw material, made ​​of iron smelting furnace silicon alloy. Because silicon and oxygen is very easy synthesis of silica, so commonly used in ferrosilicon for steelmaking deoxidizer at the same time as SiO2 generated a lot of heat release, while in oxygen, to improve the molten steel temperature is favorable. Meanwhile, ferrosilicon as an alloying element to the agent also widely used in low-alloy structural steel, spring steel, bearing steel, heat-resistant steel and electrical silicon steel among the ferrosilicon alloy production and in chemical industry, used as reducing agent.

In addition, the steel industry, the use of ferrosilicon powder at a high temperature en-burning can release a lot of heat this feature, often used as a heating agent cap ingot ingot in order to improve the quality and recovery.

Filed under: Aluminum by Garage Door Opener on 2012-05-18 08:47:24p | Social tagging: aluminium coil & strip > Aluminium Sheet > Ferro Silicon
No Comments »

Introduction of polished glass

Polished glass, said glass or white glass mirror, is an Building Glass is polished by the polishing of plate glass, polished sub-sided and double-sided polished two, the glass is polished to remove the glass with glass reinforcement and other defects. Polished glass surface is smooth and shiny, or reflective perspective from any direction of the scene is not deformed, the thickness of 5 ~ 6mm, size can be made ​​as needed. Used to install large high windows, window or mirror.

Was encountered in the production process is an important problem: high-temperature glass of water when the tank is easy through the tin condensation, resulting in uneven float glass thickness. Sometimes the glass of water splashing in a tin bath in chaos, who is full of injured workers. Luoyang Glass technicians after long-term thinking, in the upper part of the design of the tin bath electric heating equipment, glass, tin bath water by condensation of the problem easily solved. Then, they developed their own side of the glass pull machine, designed to speed, angle, indentation depth and shape forming part of the process has been modified, the more and greater width of the glass, becoming greater and greater levels, increasingly high quality.

Tempered glass processing size:Thickness: 3 ~ 19mm.Maximum size: 2440 mm × 5000mm.Minimum size: 600mm × 400mm.Minimum curvature radius: 300mm.Quality: GB15763.2-2005 China in line with national standards.

Filed under: Metal Building Materials by Garage Door Opener on 2012-05-18 08:44:16p | Social tagging: Building Glass > Float glass > Tempered glass
No Comments »

Talk about UV print

Ferro Silicon industry is essential deoxidizer. Ju steel, ferro-silicon and diffusion of oxygen for oxygen precipitation. Tile iron also as an alloying agent for steel in. Add a certain amount of steel in silicon, can significantly improve the strength of steel, hardness and flexibility, improve the permeability of the steel, reducing the transformer steel hysteresis loss. General Steel 0.15% -0.35% silicon, structural steel, 0.40% ~ 1.75% silicon, tool steel in 0.30% ~ 1.80% silicon, 0.40% silicon steel spring to 2.80%, acid-resistant stainless steel containing silicon 3.40% to 4.00%, heat-resistant steel 1.00% 3.00% silicon, silicon in the silicon content of 2% to 3% or higher.
High-silicon ferrosilicon or silicon alloys ferroalloy industry for the production of low-carbon alloy reductant. Cast iron can be added ferrosilicon inoculant for ductile iron, and can prevent the formation of carbides, and promote the precipitation of graphite and the ball, improving cast iron properties.

UV print large format printing industry, research institutions, consulting services Lyra head GreyHeld forecast, UV printing market in 2007 was 38% growth, the major printing equipment manufacturers continue to spare no effort to improve the UV printing equipment, such as printing speed increase and UV ink durability, etc., these new technologies for a range of printing applications open a new door. UV printing technology breakthrough in the following areas: UV ink in the short reaction time under UV irradiation, low temperature requirements, you can print a wide range of substrate types, but the use of UV metallic ink printing, it must be very precise, and special printing color group must be in special materials such as glass, ceramic printing, if you can solve the conductor of the UV printing process, I believe that UV printing market will be more room for expansion. UV printing industry is looking for a new blue ocean. Commercial printing companies usually rely on banner ads and display advertising business to get business, but those printing companies to offer customers advertising printing orders, apparently not satisfied with the existing, limited forms of advertising.

Such as Control Cable , pay attention to soil conditions, generally under the cable burial depth of the building not less than 0.3 meters, soft or surrounding environment more complex, such as farmland, construction sites or roads, to have a certain burial depth (0.7 to 1 m) to prevent damage to buried cable by accident, when necessary, to erect signs.

Filed under: Aluminum Composite Panels by Garage Door Opener on 2012-05-16 08:47:22p | Social tagging: Control Cable > Ferro Silicon > UV print
No Comments »

Stainless steel pipe market

The town of Foshan Lanshi stainless steel industry. Foshan City is a professional production of Stainless Steel Pipes products are the main town, and its stainless steel products include: stainless steel cold-rolled strip steel, stainless steel welded pipe, stainless steel products.

The existing cold-rolled stainless steel strip Lanshi town more than 100 production lines, the annual production of stainless steel cold-rolled steel strip 20 million to 30 million tons.

Lanshi town of existing steel pipe production line nearly a thousand articles, production of nearly 30 million tons. The main production of stainless steel decorative tubes, stainless steel pipe for fluid transport, mechanical structure with stainless steel pipe, stainless steel welded food industry, heat exchangers, etc. Used for stainless steel welded pipe. Mainly on behalf of enterprises Buderus steel and Lanshi Aerospace Stainless Steel Pipe Co. production.Lanshi town stainless steel slitting, cross-matte stainless steel, mirror processing, processing industry is very prosperous, and its output is also 20 million to 30 million tons.

BC 4000-3000 years, there have been a minor miracle, there is no evidence that this miracle happened the exact time and place, and how it happened. But some people also found – or accidentally – some slightly different flash into the flash of metal or tin-copper melt, this mixture becomes more rigid. With this discovery, the Bronze Sculpture Age began.

Filed under: Building Material Making Machinery by Garage Door Opener on 2012-05-16 08:45:29p | Social tagging: Bronze Sculpture > Stainless Steel Pipes
No Comments »

Bronze shape and decoration

Shape into a majestic bronze sculpture and more rugged, dignified and calm of the state, showing a solid deep, rich texture of brilliant. Bronze decoration mainly taotie, or animal head shapes, and then to birds, animals, insects, fish part of the body composition of abstract patterns to set off the bronze shape.

Modern urban sculpture as the city’s eyes, best reflects the city’s style and charm. The art of sculpture as a space city, although there is part of the environment exists, but the city has actively to the environment to enrich and enhance people’s subjective awareness of the environment.

Stainless Steel Pipes is a long circular hollow steel, mainly used in petroleum, chemical, medical, food, light industry, machinery and instruments and other industrial pipes and mechanical components. In addition, the bending, torsional strength of the same lightweight, so it is widely used in manufacture of mechanical parts and engineering structures. Also used in producing all kinds of conventional weapons, the barrel, shells and so on.

Filed under: Building Material Making Machinery by Garage Door Opener on 2012-05-15 09:58:52p | Social tagging: Bronze Sculpture > Stainless Steel Pipes
No Comments »

Speaking of aluminium foil

Bathroom hardware and more copper as raw material, mainly due to the copper materials will not rust as easily as aluminum, is not easily oxidized, but with the last couple of years copper prices rising, many businesses are looking for the right hardware alternatives to the production of sanitary hardware products. It is understood that the application of aluminum in the bathroom great rise in the trend in recent years, although aluminum is easily oxidized, but the advanced coating solved this trouble. The other deficiencies are also being improved, I believe the near future, aluminum metal will occupy the place in the world.

Speaking of aluminium foil , can be a lot of advantages, such as light, plasticity, not rusty, not aging, prices were relatively stable, re-processing capacity, thermal conductivity and strong, and so on. With the existing bathroom hardware commonly used in stainless steel and copper compared to aluminum, although the bathroom occupies a small proportion, but the development of promising. This point, we can get the development of related industries learn. Such as the automotive industry, the application rate of rising aluminum; doors and windows in the building materials, aluminum is widely used; in household appliances, such as rice cooker liner and so gradually to use aluminum, especially aluminum. Thus, the aluminum alloy materials, in particular, the application range is very extensive.

But why in the bathroom, the Aluminium Strip materials, in particular, can not be widely applied? Its roots in the process of aluminum processing. As we all know, whether it is tap or shower and other bathroom hardware products, in the process, the most important component is the valve and the interface, these two places not handled properly, water will flow out. Precisely because of the ductility and thermal conductivity of aluminum and strong features, resulting in both parts of the treatment process, how to maintain the seal will be very important. If this process can not be solved, the application of aluminum to be greatly limited. In addition, the aluminum corner of the treatment is relatively cumbersome, how do burr-free round, aluminum handle is also a major test.

Pipes is widely used .

At present, there are a number of bathroom hardware made in the application of a bold attempt to aluminum companies, developed a series of aluminum taps, showers and other aluminum products aluminum. Coupled with the current hardware companies to develop the majority of bathroom accessories of aluminum, aluminum bathroom cabinets, etc., the application has been gradually formed aluminum products. From the field of lighting associated with development of the industry point of view, to solve the process problems, the aluminum lighting has become widely accepted by consumers and love a category, then, aluminum bathroom bathroom hardware industry will not be a material breach, which the formation of a new category it? I believe that this is entirely possible, but companies also need bathroom together, work together to upgrade the technical capacity of aluminum bathroom, to develop more new products and styles to bigger market pie, Share market outcomes, common to meet the bathroom next spring.

Filed under: Aluminum by Garage Door Opener on 2012-05-15 09:56:30p | Social tagging: aluminium foil > Aluminium Strip > Pipes
No Comments »

Stainless Steel Tube industry

Arduous task of eliminating backward production capacity. China’s Stainless Steel Tube industry, both production technology and equipment level of world-class seamless and welded steel pipe production unit, there are increasing perforation + cold drawing unit and welded steel hot dip galvanizing line and so on. The latter process involves the production of waste acid, waste water treatment and emission problems, most of these units is very low level of equipment, environmental protection facilities are inadequate. Preliminary statistics show that China’s piercing + cold drawn seamless steel pipe units accounting for the proportion of the total number of units up to 60 percent, accounted for about 20%, hot dip galvanizing line also has a certain proportion. These units are a considerable part of the transformation required to eliminate or capacity.

Faced with complex market environment, Zhuang steel that steel industry’s future development direction, one in-depth study of the activities carried out to Baosteel, focus on improving quality control, strict implementation of full standardization of operations, the establishment of technical innovation and quality assurance scientific management system and assessment mechanism; second depth “of the standard maximization” activities, to carry out lean management, and promote cost efficiency; Third, the adjustment of product structure, accelerate the implementation of differentiation strategy, accelerate the development and extension of industrial chain cooperation, expand the product market space, fourth, to further strengthen the industry self-regulation, to avoid vicious competition, safeguard the common interests of the industry.

To break down foreign “narrow flow molding process,” the constraints of traditional skills, win development “wide molding process flow” technique, advances in the total yield to 70% to 75% over the same range of foreign consumer line advances about 15 percentage points, and standardization of design and development of complete sets of skills and move to the promotion, so that our Solar ARAC glass industry within the scope of a globe in a short time the first;

Gansu Ferro Silicon Magnesium export enterprises export the same optimism. It is reported that since the end of August, the plant’s export market is somewhat better, exercise alone gradually increased, prices have begun to pick-up signs. The end of September, the plant’s export price has been close to $ 710 / ton FOB, no wonder the trend of the fourth quarter sales quite frankly.

Filed under: Aluminum by Garage Door Opener on 2012-05-14 09:12:18p | Social tagging: Ferro Silicon Magnesium > Solar ARAC glass > Stainless Steel Tube
No Comments »

glass instruction

Humans learned to use the glass has been made ​​for thousands of years, but 1000 years, the development of glass as a building is relatively slow. With modern science and technology and glass technology development and improve people’s living standards, Building Glass feature is no longer just to meet the lighting requirements, but to have to adjust the lighting, insulation, security (bullet-proof, theft, fire, radiation, anti-electromagnetic interference), Art Deco and other features. With the growing demand for glass molding and processing methods has also been a new development. Now, has developed a laminated, tempered, ion exchange, glazed decoration, chemical and thermal decomposition of new technologies such as glass, cathode sputtering, so that the amount of glass in buildings increased rapidly, becoming the cement and steel, the third-largest building after the materials.

Float glass molding process is protected through the gas into the tin bath complete. float glass is widely used, is divided into colored glass, float silver mirror, white float glass / automotive windshield level, white float glass / all kinds of deep processing level, white float glass / scanner class, white float glass / coating class, white float glass / mirror level. One ultra-white float glass with a wide range of uses and broad market prospects, mainly used in high-end construction, high-grade glass processing and solar photovoltaic glass curtain wall areas and high-end furniture, decorative glass, crystal products, lighting glass, precision electronics industry, special construction.

tempered glass(Tempered glass / Reinforced glass) is safety glass. Tempered glass is a kind of pre-stressed glass, to enhance the strength of the glass, usually the use of chemical or physical methods, the formation of compressive stress in the glass surface, glass surface to withstand the stress caused by external offsets first, thereby increasing the carrying capacity and enhance its anti-glass wind pressure resistance, cold and heat resistance, impact resistance and so on.

Filed under: Building Material Making Machinery by Garage Door Opener on 2012-05-14 08:53:18p | Social tagging: Building Glass > Float glass > Tempered glass
No Comments »